| Last Modified: 11-29-2007 | 1.6 D | |
| Service Category: Vehicle Interior | Section: Seat Belt | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000000V7O00LX |
| Title: SEAT BELT: SEAT BELT WARNING SYSTEM: CUSTOMIZE PARAMETERS (2008 Sequoia) | ||
CUSTOMIZE PARAMETERS
1. CUSTOMIZING FUNCTION WITH TECHSTREAM (REFERENCE)
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Utility / Customize /
(e) Select the setting by referring to the table below.
Warning
|
Display (Item) |
Default |
Content |
Setting |
|---|---|---|---|
|
D-Seatbelt Warning Buzzer |
ON |
Seat belt warning buzzer ON/OFF setting |
ON: Driver buzzer ON OFF: Driver buzzer OFF |
|
P-Seatbelt Warning Buzzer |
ON |
Seat belt warning buzzer ON/OFF setting |
ON: Passenger buzzer ON OFF: Passenger buzzer OFF |
HINT:
When the buzzer OFF setting is selected, the buzzer activation while the vehicle is being driven is cancelled. However, the buzzer activation when the ignition switch is turned to ON cannot be cancelled.
|
|